ACT-IR220L Infrared Wireless Interface

Windows device driver information for ACT-IR220L Infrared Wireless Interface

The ACT-IR220L Infrared Wireless Interface attaches to the serial port of desktop PC to give the user wireless data transfer for record synchronization, file back-up and network access, directly from IR-capable notebook PCs and PDAs. In most cases, no external power is needed. It uses build in drivers. ACT-IR200L uses the IBM chipset and is compatible with multiple IR standards; ASK (500 KHz) used by Sharp's Wizard and Zaurus, and Apple Newton. ACT-IR220L Infrared Wireless Interface is IrDA compatible from 9.6K to 115.2K bps; that in most cases, can reach communication distance of 0 cm to 200 cm. AC adapter is optional. The ACT IR220L uses the HP chipset which is supported by HP-LX/Omni book, IBM-ThinkPad 755, Gateway 2000-Liberty, Psion Series 5 and 3C, and many IrDA capable notebook PCs, PDAs.

The IR220L Infrared Wireless Interface has a communication speed of 9.6, 57.6, 115.3k bps and a distance of 0cm to 200 cm and ASK speeds at 9.6, 19.2K bps. The connector is an integral 4-foot cable with DB9F. The source of power is a serial port directly and power consumption is 0.30 watts at the peak. Its dimension is 2 inches length by 1.63 inches width by 0.63 inches height and 2 ounce or 54 grams for the weight. It is compatible with the following IrDA capable devices: Notebook; AcerNote 950C/CX, AST Ascentia 950N, Cannon Note PC, Compaq LTE, NEC Infrared Notebook PC, HP Omnibook, Sharp PC 8900G, Toshiba PV3000. It is compatible with the following software; Windows 95 -IR driver, HP LaserJet - 5MP driver, Puma -TranXit, Sharp Zaurus Application Partner, Rupp Lynx 3.1 and Clipboard Link and the HP-5MP Laser Printer. It is highly recommended you run a free registry scan for and ACT-IR220L Infrared Wireless Interface errors before installing any driver updates.