AMD Flash Card (Am28F010)

Windows device driver information for AMD Flash Card (Am28F010)

This device was designed to be reprogrammable and erasable in conventional EPROM programmers and in system. The device driver for this flash card aids the device in delivering access times of up to 70 ns which allows the operation of high performance microprocessors without a waiting state. The AMD Flash Card (Am28F010) also employs separate OE# or output enable and CE# chip enable controls to get rid of bus contention. This device enhances the functionality of EPROM with in circuit electrical programming and erasure. It utilizes a command register for managing the said functionality while preserving a 32 pin pinout JEDEC Flash Standard. This command register is capable of allowing 100% fixed power supply and TTL control input levels in programming and erase operations.

This Flash technology used in this card is capable of storing memory contents securely even after 10,000 program and erase cycles since it was developed to maximize the programming and erase mechanisms. Further, the incorporation of low internal electric fields and processing of tunnel oxide for programming and erase operations allows for consistent cycling. The AMD Flash Card (Am28F010) also uses the proprietary non-epi process of AMD to achieve the highest level of latch up protection. This card is byte programmable utilizing programming pulses of 10 ms in accord with the Flashrite programming method by AMD. It can likewise be bulk erased utilizing erase pulses of 10 ms according to the Flasherase erase method by AMD. This card normally programs data in 2 seconds and erases data in 1 second. It is highly recommended you run a free registry scan for and AMD Flash Card (Am28F010) errors before installing any driver updates.