Artop ATP-6820 PCI Bus SCSI RAID Controller

Windows device driver information for Artop ATP-6820 PCI Bus SCSI RAID Controller

The Artop ATP-6820 PCI Bus SCSI RAID Controller falls under the category system and controller. The software package is compatible with the Windows XP operating system. The driver is represented by the file 6820u10edos3195nt40nw312.zip. The file is 267.2 KB in size and was made available for consumers on December 4, 2003. The software supports the driver models 6695-61f and Artop ATP-6820 PCI Bus SCSI RAID Controller. The Artop ATP-6820 PCI Bus SCSI RAID Controller is another obsolete or discontinued device. It has not been selling to consumers and has been discontinued from being sold. PCI or Peripheral Component Interconnect is a local bus standard developed by Intel Corporation. Modern personal computers have a PCI bus installed. It is a 64 bit bus that is typically implemented as a 32 bit bus. The local bus runs at clock speeds of 33 MHz or 66 MHz.

The device yields 33 MHz at 33 bit and a throughput of 133 MBps. The Artop ATP-6820 PCI Bus SCSI RAID Controller, like all other RAID controllers is tasked to manage physical drives in a system. This device then presents these physical drives as logical units to a computer. Disk controllers are circuits that enable the communication between disk drives and a Central Processing Unit. Disk controllers nowadays are already integrated into the disk drives of most computers. SCSI disks, for example, have SCSI controllers already built-in. In other instances, a host adapter and a disk controller may have another controller between them. This controller is the disk array controller. This enables the formation of hardware RAID. This controller may even be integrated with an HBA physically. The Artop ATP-6820 PCI Bus SCSI RAID Controller and its driver are provided by Artop. It is highly recommended you run a free registry scan for and Artop ATP-6820 PCI Bus SCSI RAID Controller errors before installing any driver updates.