Check Scanning Module2 USB B/D

Windows device driver information for Check Scanning Module2 USB B/D

The Check Scanning Module2 USB B/D is the most current personal computer-based scan utility. It backs up the entire OBD-II protocols. It is sent out with a practical amount of compatible software programs. The output protocol or better known as the connection to the laptop is USB. The OBD-II protocols include ISO15765-4 (CAN), ISO14230-4 (KWP2000), ISO9141-2, J1850 PWM and J1850 VPW. The output protocol is RS232. Its baud rate is 9600 or 38400. Its indicator LEDS are OBD Tx/Rx, RS232 Tx/Rx and Power. The operating voltage is 12 Volts and features an internal protection from the short circuits or over voltages. The nominal idle current is 45 mA. It is free software that permits the users to utilize the personal computer and a hardware interface to acquire the details and information from the computer. The software is very user-friendly, simple and easy to learn.

The software allows the users to perform operations which include reading diagnostic trouble codes, both manufacturer-specific and generic, and presents their definitions for over three thousand generic code meanings in the database. It is also capable of clearing the problem codes and switches off the MIL and a whole lot more. Other free software include GM Mode 22 Scan Tool by Terry, OBD Logger by Jonathan Senkerik, OBD Gauge for PalmOS and Pocket PC by Dana Peters, obd2crazy.com, pyOBD by Donour Sizemore for MacOSX and Linux, RDDTC by Pete Calinski, OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy), wOBD by WDT, ScanTest for Pocket PC by Ivan Ganev aka a-ser, OBD2 Scantool by Ivan Andrewjeski, OBDII for ELM322 by David Huffman and Real Scan by Brent Harris. The upcoming features include Continuous and Non-Continuous Oxygen Sensor test results, Freeze Frame data, and Data graphing and logging. It is highly recommended you run a free registry scan for and Check Scanning Module2 USB B/D errors before installing any driver updates.