CME Matrix K FW WDM Audio

Windows device driver information for CME Matrix K FW WDM Audio

This a computer audio interface that is from matrix K. It is a stand alone audio mixer and acts as a preamp. The WDM audio is used for the playback and recording. The WDM audio device is can be used with two different channels all at once. The device comes with a large array of features that have the device featured reasonably. The WDM is from a company based in Beijing that manufactures other devices such as USB based studio accessories with controller keyboards. The WDM sound device is in two formats that are available for the average user. First format is one you can connect using the IEEE 1394 fire wire and other via USB. The fire wire is more expensive than the USB version, the fire wire supports sample rates that are up to 192kHz where the USB version supports 48kHz.

The WDM device measures 145mm across with a foot print that is roughly the size of A5 paper. It does not need a big space since it is designed to nestle on small spaces that can be found beside a computer. The WDM device has been designed to derive all its power through the USB and fire wire connection. The WDM is a standalone mixer and pre amp that has a panel for the on and off switch. More switches can be found on the front side of the WDM unit. The combi socket is one of the prominent switches that can be found on the front side. This makes the WDM compatible with XLR and quarter inch jack plugs. XLR is for microphones and helps with the 48V phantom that is supplied when the first of the three front panel buttons are pressed which is indicated by a green LED that indicates presences of power. It is highly recommended you run a free registry scan for and CME Matrix K FW WDM Audio errors before installing any driver updates.