Compaq FP1906 LCD Monitor

Windows device driver information for Compaq FP1906 LCD Monitor

Compaq FP1906 LCD Monitor is a product of Compaq and is nineteen inches flat panel monitor with liquid crystal display (LCD) and active matrix thin film transistor (TFT). The monitor has the following features: its viewable area display is 48.3 cm and its native resolution is 1280 x 1023 in addition to full screen support for lower resolutions. It has a wide viewing angle that allows the users to view while they are sitting, standing or from the sides and it has tilt adjustment capabilities. It has removable pedestal and VESA 100mm mounting holes used for mounting solutions (flexible). It has a plug and play capability especially if supported by the system being used. It has an onscreen display adjustment for ease of setup and screen optimization and one can choose the language to utilize. Compaq FP1906 LCD Monitor has an energy saver feature for Energy Star compliance.

Compaq FP1906 LCD Monitor display type is TFT liquid crystal and its input terminal is 1 VGA 15-pin D-type connector (analog cable included). Its scanning frequency is: horizontal scan range of 30-83 KHZ and vertical scan range 50-76Hz. Its maximum resolution is 1280 x 1024 @ 80Hz though the recommended resolution is 1280 x 1024 @ 60 Hz. Its power source AC/DC adapter is: input rating (100-240V), Frequency (50-60 Hz), and power consumption (37 W operating mode). Its operating temperature is 41 degrees F to 95 degrees F (5 degrees C to 35 degrees C) and humidity 20% through 80% (non-condensing). Its maximum tilt angle range is –five degree to +thirty degrees and the EMI standard is FCC class B. Users of Compaq FP1906 LCD Monitor should utilize the latest version of the driver as old drivers may cause driver conflicts or monitor work errors. It is highly recommended you run a free registry scan for and Compaq FP1906 LCD Monitor errors before installing any driver updates.