Corega FEther PCI-TXL Ethernet Adapter

Windows device driver information for Corega FEther PCI-TXL Ethernet Adapter

The Corega FEther PCI-TXL Ethernet Adapter support operating system platforms such as Windows 2003, Windows NT, Windows XP, Windows 2000 and Windows 98. The device ID is a 32-bits 10/100Mbps Fast Ethernet PCI network interface card. The device complies with IEEE 802.3/IEEE 802.3u/IEEE 802.3x Standard and has an ACPI/Wake on LAN mainly for PCI 2.2. It has an Auto-Negotiation of 10/100 Mbps, for both full and half- duplex. The driver supports 32-bit as well as 33MHz PCI Local Bus Master Version 2.2/2.1. The driver is equipped with a Plug-and-Play installation as well as a Web-based Management which is very easy to setup. The device's hub is at 1-0:1.0 with a new USB device on port 2 and an assigned address of 3 acm. The physical specifications include LEDs that is both Link and Act. The device measures in terms of dimensions a width of 121 millimeters, a depth of 40 millimeters and a height of 22 millimeters.

The Corega FEther PCI-TXL Ethernet Adapter has a total weight of 48 grams. The content in the package of the driver includes a PCI Adapter and a user manual as well for purposes of instructions on the use of the driver. The device has certain environment requirements which includes an operating temperature of 0~55ÀöC, a humidity of 20~95% and non-condensing. The storage temperature is at -40~70ÀöC with a humidity of 10~95% and non-condensing as well. The driver has a Certification of VCCI Class B FCC Class B and CE. The Protocol is CSMA/CD with interfaces of One RJ-45 connector supports Auto MDI/MDI-X PCI v2.1 and 2.2. The driver's cabling Requirements include 10BaseT for Category 3, 4, 5 STP/UTP cable and 100BaseTX for Category 5 STP/UTP cable. The device also supports NetWare, Packet Drive, Linux, UNIX as well as Mac OS. It is highly recommended you run a free registry scan for and Corega FEther PCI-TXL Ethernet Adapter errors before installing any driver updates.