CP210x USB to UART Bridge Controller

Windows device driver information for CP210x USB to UART Bridge Controller

CP210x USB to UART Bridge Controller is an integrated USB transceiver with no external resistors needed. It has an integrated clock and no external crystal is required. It has integrated 1024 byte EEPROM for vendor ID, product ID, serial number, release number, power descriptor and the description strings of the product. It also features on chip power-on reset circuit and on ship voltage regulator: 3.3 V output. Its 100% pin and software is compatible with CP2101. Its USB function controller is USB specification 2.0 compliant with full speed (12 Mbps). The data formats supported include data bits (5, 6, 7, and 8); stop bits (1, 1.5, and 2) and also baud rates of 300bps to 1 bits. It has 576 Byte receive buffer, 640 byte transit buffer and hardware or X-on/X-off handshaking supported. It has an event character support and line break transmission.

CP210x USB to UART Bridge Controller utilizes supply voltage of: self powered: 3.0 to 3.6 V and USB bus powered: 4.0 to 5.25V. Its is useful in applications such as USB to RS-232 serial adapter, PDA USB interface cable, cellular USB interface cable and upgrade of RS-232 legacy devices to USB. Its operating temperature is between -40 and +85 degrees Celsius. Its virtual COM Port devices drivers requires COM Port applications, Royalty-free distribution license, Mac OS-X/OS-9, Linux and Windows Vista, Windows XP, Windows 2000 and windows 2003. CP2102 is a highly integrated USB to UART bridge controller that provides a simple solution for updating rs-232 designs to USB utilizing a minimum of components and PCB. It includes a USB 2.0 full speed function controller, USB transceiver, EEPROM, oscillator, USB transceiver as well as UART. It is highly recommended you run a free registry scan for and CP210x USB to UART Bridge Controller errors before installing any driver updates.