CTX PR960F series

Windows device driver information for CTX PR960F series

CTX PR960F series is a 19 FD Tritron CRT and a diagonal viewable image size of 18” inches. It has a 0.24mm centre pitch aperture grille and has USB hub and ARAG Screen treatment. Its horizontal frequency range is between 30 and 110 kHz and a vertical frequency range of between 50 and 160Hz. Its screen resolutions are as follows: 1800 x 1440 at 72Hz, 1600 x 1200 at 87Hz, 1280 x 1024 at102Hz, 1024 x 768 at 136Hz and 800 x 600 at160Hz. Its video input has a bandwidth of 232 MHz while the video input signal is RGB analog (0.7V p-p, 75 ohms) and sync of Separate TTL H/V +/-, Composite, Sync-on-green. Its input connector is 15-pin mini D-sub (Detachable cable) BNC Connector and is compatible with IBM PC and PC compatibilities and Mac (1152 X 864).

CTX PR960F’ power requirement is between 100-120/220-240V AC (auto switch), 50/60Hz and the power consumption (when on operation mode) of 125W on the maximum. Its user control include: power on/off, key 1, key 2, up and down. The On screen menu controls include those of brightness, contrast, H/V position, Rotation, Pin Balance, Side-Pin, Trapezoid, and Parallelogram, Moire cancellation, Multi language, Reset and Degauss status. Other user control include convergence, Recall, BNC-sub select, self-diagnosis, color adjustment, Input frequency display, frequency out range alarm. Its operating temperature is between 32 degree F to 104 degrees F and the operating humidity of between 20% and 80% (none condensing). Users of CTX PR960F’ should always use the latest versions of the device driver as this would assist them to use its functions easily. Old versions may cause device conflicts or errors in monitor work. It is highly recommended you run a free registry scan for and CTX PR960F series errors before installing any driver updates.