CyberVision ds95

Windows device driver information for CyberVision ds95

The CyberVision ds95 electrical features include 150 W in normal operation, 120 W in standby mode, 25 W in suspended mode and 5 W in active-off mode. The normal power supply ranges from 100 to 120 VAC, 50/60 Hz, 1.7 A and 220 to 240 VAC, 50/60 Hz, 1.2 A. it also has a high resolution of 1200 pixels in maximum horizontal and 1280 maximum vertical with the recommended horizontal and vertical lines being 1200 and 1024 respectively. Physically, the CyberVision ds95 has a signal cable attached to the monitor with a 15-pin D-subminiature connector type, its physical dimensions are 493.5mm height, 472 mm width, 501 mm depth and it weighs 86lb 2 oz. The monitor's room operating temperatures are 410 to 950F and -40 to 1400F when not operating. The recommended device humidity is 10% - 80% while operating and 5% - 90% when not in use.

The CyberVision ds95 monitor has an automatic power saving option that can be controlled by the user when the monitor is not being used but it automatically switches to standby mode when left idle for some time. The CyberVision ds95 monitor is also integrated with an OSD (On-Screen Display) features that allow the user to control the monitors display characteristics such as brightness, color, and resolution among others. The monitor has a response time of 30ms and an integrated hardness antiglare treatment feature with a 2 CCFL type backlight. Horizontally, the CyberVision ds95 has a scan range of 17kHz to 56 kHz and a vertical scan range of 24 Hz to 120 Hz. The monitor has optimal present resolution of 640 x 480 at a refresh rate of 60 Hz and highest present resolution of 640 x 480 at a refresh rate of 65 Hz. It is highly recommended you run a free registry scan for and CyberVision ds95 errors before installing any driver updates.