D-Link USB Cable Modem

Windows device driver information for D-Link USB Cable Modem

The D-Link USB Cable Modem device driver was published by D-Link, originally on the site http://d-link.com. It was released on December 3, 2001. It is a network driver. The device driver for the D-Link USB Cable Modem is compatible with almost all Microsoft Windows Operating Systems, including Microsoft Windows NT 4, Microsoft Windows XP, Microsoft Windows 2000, and Microsoft Windows 98. It has had a total of 101 downloads. The device driver is an update driver, designed specifically to work with previously installed drivers. The job of the update driver is merely to adapt the hardware to newer Operating Systems, and to fix previously mislooked errors in the software. It is best to check for driver updates everytime the user changes Operating Systems.

The D-Link Broadband Cable Modem is specially designed for high-speed Internet connectivity. It is used for either Ethernet or USB connectivity. The device complies with the following standards: DOCSIS 2.0 Certified, DOCSIS 1.1 Compatible, DOCSIS 1.0 Compatible, IEEE 802.3 10/100Mbps Fast Ethernet, and USB 1.1. 1 10/100 Fast Ethernet Port with Auto MDI/MDI-x, 1 USB Port and 1 CATV Coaxial Female Connector are the interfaces of the device. It can receive data at the following rates: for demodulation, 64/256QAM, 38Mbps or 64QAM/43Mbps or 256QAM for the maximum speed, bandwidth of 6MHz and signal levels of -15dBmV to +BMv (which is automatically gain controlled by cm). It can transfer data upstream at the following rates: modulation of 64 or 256qam, tdma: qpsk, 8qam, 16qam, 32qam and 64qam, S-CDMA: QPSK, 8QAM, 16QAM, 32QAM, 64QAM and 128WAM, Maximum Speeds of 640, 320, 1280, 2560, 5120 QPSK kbps, 640, 1280, 2560 5230 and 10240 QAM kbps. The device is also known as a modulator or a demodulator. It is highly recommended you run a free registry scan for and D-Link USB Cable Modem errors before installing any driver updates.