DELL CERC 6/i Adapter RAID Controller

Windows device driver information for DELL CERC 6/i Adapter RAID Controller

DELL CERC 6/i Adapter RAID Controller has been designed to comply with Dell hard disk drives, solid state disks as well as SATA HDDs that are serial attached. However, the device does not comply with the mixing of SAS together with SATA drivers in a virtual disk. Apart from that, the device is also not compatible with the mixing of HDDS as well as SSDs in one virtual disk. The device operates with RAID levels including 0, 1, 5, 6 as well as 10. It does not have any enclosures per port but it has 1 x 4 internal wide port. DELL CERC 6/i Adapter RAID Controller operates using two processors which include a 4 – port that has 1078 as well as an LSI adapter SAS RAID – on – chip. The device is easy to use and install and offers high performance.

DELL CERC 6/i Adapter RAID Controller has been designed with a cache memory estimated at 128 MB DDRII cache. The cache fitted on this device performs such functions as Write – Back, Adaptive Read Ahead, Read – Ahead, Write – Through as well as No – Read – Ahead. What is more, the device has also been designed with a maximum number of 2 arrays of Spans per Disk Group. Apart from that, the device also operates with a maximum number of 16 Virtual Disks per Disk Group. This is related to non – spanned RAID levels including 0, 1, 5, and 6. Additionally, the device also operates with one virtual disk per disk group that is related to level 10 of spanned RAID. DELL CERC 6/i Adapter RAID Controller also operates with about 64 virtual disks per controller while it also supports Online Capacity Expansion. It is highly recommended you run a free registry scan for and DELL CERC 6/i Adapter RAID Controller errors before installing any driver updates.