Dell D1626HT

Windows device driver information for Dell D1626HT

This computer display monitor belongs to the UltraScan product series which is capable of accepting analog video signals. This hardware component which is based on the Cathode Ray Tube design receives analog signals at 0.7 Vpp and becomes positive at 75 Ohms. The device driver makes use of a TTL level for separate sync and composite sync. Positive and polarity free implementations are set for both separate and composite sync methods respectively. For sync on green the value is set by the manufacturer at 0.3 Vpp with plus or minus 10 percent of the value. The device driver supports a horizontal frequency value of 107 kHz and a corresponding vertical frequency value of 48 up to 106 Hz. The overall screen dimension of the Cathode Ray Tube is set at 21 inches by the manufacturer with a viewable image size equivalent to 19.8 inches when measured diagonally.

Based on the manufacturer's specification the effective deflection angle of the Cathode Ray Tube is set at 90 degrees. Like most analog type computer display monitors the Dell D1626HT makes use of a 15-pin D-sub connector on both ends of the video cable. The execution of this computer display monitor and its corresponding device driver is supported by the device driver of the installed graphics processing card of the host computer system. The correct installation of the associated device driver allows for the implementation of the maximum display resolution of 1600 pixels for 1200 video lines. The installation of the correct device driver provides the computer user with access to 23 preset configurations. These preset configurations have been tested by the manufacturer to provide the optimum combination of display resolution and refresh rate. For Cathode Ray Tube based computer display monitors these two display attributes effectively define the quality of the image on the computer screen. It is highly recommended you run a free registry scan for and Dell D1626HT errors before installing any driver updates.