Dell D828L

Windows device driver information for Dell D828L

Dell D828L's input signals for video is RGB analog, 0.714 Vpp, positive at 75 ohm; while its separate sync is TTL level and its composite sync is TTL level (negative and positive). Its scanning frequency is line between thirty and fifty four kHz and its refresh (vertical) is between fifty and one hundred and twenty Hz. Its CRT dimensions are 15-inch FST flat and square and its deflection angle is ninety. Its dot pitch is 0.28 mm while its phosphor type is P22 medium short persistence. The monitor's face treatment is silica-coated with antielectrostatic properties and its display area is as follows: vertical (200mm and 3mm) and horizontal (267mm and 3mm). Some of the physical characteristics of the monitor include: its connector is 15-pin D-subminiature and its signal cable type is 15-pin-to-15-pin detachable, 1.5 m and ivory in color.

Its dimensions are as follows; height (15.2 inches), width (14.8inches), depth (16.8inches) and weight 29.8 Ib. Its power during the normal operation is between 75 W and 85 W and 60 W at the standby mode. During its suspend mode its power consumption is 15 W while its power-off mode is 5W. The monitor's AC input voltage is between 90 and 264 V. Dell D828L has an operating humidity of 10% to 80% and storage humidity of 5% to 95%. Its operating altitude is between 0 to 3000m while its thermal dissipation is 256 BTU/hr. Its maximum horizontal resolution is 1024 pixels, maximum vertical resolution is 768 lines and its maximum pixel clock is 65 MHz. Users of Dell D828L should always utilize the latest versions of the device driver so that they can use its functions easily. Old versions may cause device conflicts or monitor work errors. It is highly recommended you run a free registry scan for and Dell D828L errors before installing any driver updates.