Dell E173FP

Windows device driver information for Dell E173FP

The Dell E173FP monitor is a Dell corporation manufactured device integrated with a 15 inch TFT LCD with active matrix feature with a viewing angle of 1200 typical in horizontal position and 1000 typical view in vertical position. The monitor has a luminance output of 250 CD/m2 typical and a contrast ration of 350:1 typical. The Dell E173FP has a response time of 30ms and an integrated hardness antiglare treatment feature with a 2 CCFL type backlight. Horizontally, the Dell E173FP has a scan range of 30kHz to 61 kHz and a vertical scan range of 56 Hz to 76 Hz. The monitor has optimal present resolution of 1024 x 768 at a refresh rate of 60 Hz and highest present resolution of 1024 x 768 at a refresh rate of 75 Hz. The high resolution assures the user of image clarity and high quality.

Some of the Dell E173FP electrical features include an RGB, 0.7 Volts =/-5%, 75 ohm impedance video input signals, a 90 ~ 256 VAC/50 ~ 60 Hz 2A (RMS) max AC input voltage/frequency/current features. The monitor can operate on an inrush current at 220 V with a max of 60 A, and an inrush current at 110 V with a max of 30 A. physically, the Dell E173FP has a signal cable attached to the monitor with a 15-pin D-subminiature connector type. Its room operations temperatures are 410 to 950F and -40 to 1400F when not operating. The recommended device humidity is 10% - 80% while operating and 5% - 90% when not operating. The Dell E173FP monitor has thermal dissipation of 103 BTU/hour (maximum) and 86 BTU/hour (typical). The Dell E173FP monitor can be used in an attitude of 12,000 ft when operating and 40,000 ft when not operation. It is highly recommended you run a free registry scan for and Dell E173FP errors before installing any driver updates.