Dell SE177FP

Windows device driver information for Dell SE177FP

Dell SE177FP is of the screen type active matrix-TFT LCD and its screen dimensions are17 inch diagonal viewable image size. Its preset display area is: horizontal (13.3 inches) and vertical (10.6 inches) while its pixel size is 0.264 mm x 0.264 mm. Its viewing angle is 1200 (vertical) and 1400 (horizontal). It luminance output is 300 cd/m2 and its contrast ratio is 500:1. The monitor has a faceplate coating of anti-glare with hard coating 3H and its backlight is 4 CCFLs backlight while its response time is 8 ms typical (black to white). Dell SE177FP has a horizontal scan range resolution 30 kHz to 81 kHz; vertical scan range of 56 Hz to 76 Hz; optical preset resolution of 1280 x 1024 at 60 Hz and highest preset resolution 1280 x 1024 at 75 Hz. It utilizes video input signals, Analog RGB: 0.7 Volts +/-5%, 75 ohm input impedance.

Dell SE177FP utilizes synchronization input signals: separate horizontal and vertical, 3.3V Cmos or 5V TTL level, positive or negative synchronization. Its AC input voltage, frequency and current are 100 to 240 VAC, 50-60 Hz and 1.5A (RMS) (Maximum) respectively while its Inrush current is 110V: 30A (Maximum); 220V: 60A (Maximum). Other features of Dell SE177FP include: signal cable type is D-sub which is detachable, analog, 15pin, blue connector and attached to the monitor. Its physical dimensions are 15.34 inches, 14.75 inches, 5.38 inches and 10.67 lb in height, width, depth and weight respectively. Its operating temperature is between 5o and 35o C. Users of Dell SE177FP should always utilize the latest version of the driver so as they can use its functions easily. Old versions may cause device conflicts or monitor work errors. The drivers should be updated at least once per every month. It is highly recommended you run a free registry scan for and Dell SE177FP errors before installing any driver updates.