Digi PortServer TS 4 Port 2

Windows device driver information for Digi PortServer TS 4 Port 2

The Digi PortServer TS 4 Port 2 is a form of wired connectivity technology. It is a device server measuring 3.3 inches in height, 5.2 inches in height, and 0.9 inches in depth. It weighs 2.3 ounces. It has a total of four ports. The remote management protocols of the device are SNMP, Telnet, and HTTP. It is equipped with two status indicators; one for the link activity and one for the power. It has features like flow control, RARP support, manageable, DHCP support, and RealPort technology. It uses SNMP, Telnet, Reverse Telnet, and Digi Port Authority for management and protocols. It also uses HTTP or HTTPS to configure easily through different Web interfaces. For security, it uses SSHV2, port buffering, and the Patented RealPort.

The device is used for networking, especially in businesses. It can be used as a gateway for fast GSM, 3g, and CDMA. It has Wi-Fi drivers as well as a ZigBee radio module. It has a standard serial to Ethernet connectivity. It has an RJ45 serial port and RS 232 interface. The Baud rates of the device are up to 230 Kbps. It has full hardware and modem flow control. It has 2 socket services: TCP and UDP. The UD socket services has multicast. It has both telnet and reverse telnet. It is equipped with Real Port with encryption. This is for OCOM and TTY ports. It has a 9-30 VDC power input, and a RFC 2217. It has modem emulation as well. It can read and write SNMP. It also has port buffering capabilities, and low latency. Other features include Modbus to Modbus TCP conversion, Digi Port Authority (remote management diagnostics and auto discovery tool), DHCP, RARP, ARP-Ping and Static IP for the assignment of IP addresses, an LED status for link and power management, and an RJ45 DB9F crossover cable which is included for configuration. It is highly recommended you run a free registry scan for and Digi PortServer TS 4 Port 2 errors before installing any driver updates.