EIO AP-1680 ATA 133 RAID Controller

Windows device driver information for EIO AP-1680 ATA 133 RAID Controller

EIO AP-1680 ATA 133 RAID Controller is a product of InnoVISION Multimedia Ltd and is compatible with operating systems such as Windows Vista, Windows NT SP3, Windows XP, Windows NT SP2, Windows 2000 SP3, Windows 98, Windows 2000, Windows Vista, Windows NT SP1, and Windows NT. EIO AP-1680 ATA 133 RAID Controller card supports storage devices that have RAID (0 and 1) capability above 137GB. The data can be moved at a high speed of 133 MB/sec while the hard drive capacity is accessible beyond 137 GB using 48 bit. EIO AP-1680 ATA 133 RAID Controller card increases data transfer between a hard disk and a PC up to 33% as compared to a normal EIO AP-1680 ATA 133 RAID Controller. Some of the supported software for EIO AP-1680 ATA 133 RAID Controller includes Windows NT SP1 EIO AP-1680 ATA133 RAID Controller 1.0.0.12 win driver and Windows 2000 SP3 EIO AP-1680 ATA133 RAID Controller 1.0.0.12 zip among others.

To install EIO AP-1680 ATA 133 RAID Controller, one should first download its file from a resourceful site, save it in the PC and then unzip. Next, connect EIO AP-1680 ATA 133 RAID Controller to the PC. Right click “My Computer” and then click “Properties.” On the “Hardware tab,” click the “Device Manager” button. The new EIO AP-1680 ATA 133 RAID Controller will now be visible on “scsiadapter” category. One should make double-click on “Device” and then press “Reinstall Driver” button. Next, one should select “Install from specific location” and then check “Include this location” before checking “Include this location.” Click “Browse” button so as to select “InnoVISIONdriver, “Next” button to proceed and finally “Finish” completing the installation. It is after this step that one will be in a position to see EIO AP-1680 ATA 133 RAID Controller in “scsiadapter” that is inside the “Device manager.” It is highly recommended you run a free registry scan for and EIO AP-1680 ATA 133 RAID Controller errors before installing any driver updates.