Excelstor Technology J880

Windows device driver information for Excelstor Technology J880

ExcelStor Technology J880 is an internal hard drive that has the capacity of 80 GB. It has physical dimensions of 10.2 cm x 14.6 cm x 2.5 cm in width, depth and height with duplexer weight of up to 1.3 lbs. It has average latency of up to 4.17, 7,200 rpm spindle speed and 2MB buffer. ExcelStor Technology J880 has inspiring transfer arte of up to 61.1 MBps when it is internal and 133.0 MBps when external. It has form factor of 3.5' x 1/3H and average sleek time of 8.5ms. There is the availability of shock tolerance in the drive which is 55.0 g at 2ms half-sine pulse when it is operating and when it is not operating it becomes 350.0 g at 2ms half-sine pulse. The driver can operate at a maximum temperature of up to 131.0 °F and minimum temperature of up to 41.0 °F with average humidity of 8 to 90%.

ExcelStor Technology J880 internal hard drive is directed by the Marvell 88i6522 chip as the 2 MB barrier is normally controlled by the memory chip ESMT M12L16161A-5T. ATMEL AT49F1024 flash memory chip is used for storing ExcelStor Technology J880 drives firmware. Power consumption for ExcelStor Technology J880 internal driver differs, when idle consumes 7.0 watts, when it is active it consumes 7.1 watts, and when it is standby it consumes 0.5 watts. It supports media to and from buffer to a maximum of up to 741MB and buffer to and from host up to a maximum of 133MB. ExcelStor Technology J880 driver has compatible Bays of 1.0 x 3.5' x 1/3H Internal but it does not have compatible Slots. ExcelStor Technology J880 drive has a stop and start ratio cycle of 50000.0. ExcelStor Technology J880 driver has no compatible standards with a quantity of only one package. It is highly recommended you run a free registry scan for and Excelstor Technology J880 errors before installing any driver updates.