Hansol 700Fs

Windows device driver information for Hansol 700Fs

The Hansol 700Fs has a 17-inch LCD monitor, with flat panel display or TFT monitor. The Hansol 700Fs' uses a Super TFT Amhporous Active Matrix. The panel's diagonal size is 17 inches (423.70mm) while the panel diagonal view size is 270,3mm * 337.9 mm. This monitor's pixel pitch is 0.264mm * 0.264 mm, while the native pixel format is 1024*768. The brightness of this monitor can reach up to 250cd/m2 Typ and its contrast ratio around is 350:1 Typ. This monitor's viewing angle is 55 percent up, 60 percent degrees down, 70 degrees left and 70 degrees right while its response time is 35 (ms). The vertical frequency of this device has different available resolutions which include 12808*1024 (optimal)+, 1020*768'+ and 800*600. This monitor's display color depth is 256K colors or 16-bit and its signal inputs are analog VGA with a 15-pin D-sub.

This Hansol 700Fs monitor has speakers that have 2x3 wattages and its sync types which include H, V and separate TTL sync. It is a plug and play tool with DDC 1/2b (EDID). The tilt sand's angle is 0 degrees to 30 degrees. Maximum power consumption for this product is 55 watts, with less than 5 watts consumption when on standby. Its power input AC adapter is 85-265 volts or 50-60 Hz. The monitor has OSD controls but it doesn't have a USB hub. The VESA mounting for this monitor is 75mm. This product is covered by a 3 year warranty. It is highly recommended you run a free registry scan for and Hansol 700Fs errors before installing any driver updates.