High speed USB Ethernet adapter

Windows device driver information for High speed USB Ethernet adapter

High Speed USB-Ethernet Adapter is a unique solution to interface peripheral devices to Universal Serial Bus 2.0 (USB 2.0) and 10BT/100TX Ethernet. This device has been specially designed to provide simple solution to communicate with Ethernet applications accomplished by its highly integrated functionality. It is ideal for LAN applications. It also provides serial interface for EEPROM storing device ID. Features: Provides full duplex operation on both 100 Mbps and 10 Mbps Ethernet modes. It is built to Support remote wake up. It provides an Exhaustive Ethernet MAC status report. It supports both PAUSE control frame and USB specification 2.0 compliant. All USB standard commands and three vendor specific commands are accessible. USB Suspend/Resume detection logic and chirping and ping protocol can be used easily on it. Provides serial interface for read 93LC46B EEPROM. It also automatically loads device ID from EEPROM after power-on reset. EEPROM can be programmed through USB port.

It works in all USB specifications of versions of 2.0, 1.1 and 1.0. The Ethernet standards of IEEE 802.3 and 802.3u 100 BASE-T, TX and T4 are all compatible to this adapter. It can operate on supported mode and remote wake up. It can be connected to up to 127 devices by cascading multiple hubs. The adapter supports both full and half duplex in fast Ethernet. It operates in room temperature of 0 to 55 degrees centigrade and requires power input of 2.5 w, 0.5 A @3.3 VDC (+ or - .3 VDC). Its power consumption is 150 mA@ 3.3 VDC. It comes with a 10/100Mps Network connectivity, a 10/100Mps speed detection. It is embedded with a 7k * 16 bit SRAM buffer. It complies with international standards of CE, FCC Class B, VCCI and UL. It has a one year warranty. It is highly recommended you run a free registry scan for and High speed USB Ethernet adapter errors before installing any driver updates.