Hitachi CM800

Windows device driver information for Hitachi CM800

The device driver for the Hitachi CM800 is used to provide optimum usage for the 21-inch display area of the computer monitor. The importance of the device driver of this display screen is highlighted when using the hardware with Operating Systems that do not provide native support for its feature sets. Plug and Play technology which is used by majority of 32-bit and higher Operating System platforms support many of the computer monitors in the market but only to a certain extent. In many instances like in the case of the Hitachi CM800 display monitor, some features are not activated by default without the device driver. In order to maximize the advantages of the XGA display of the monitor, it is necessary to have the correct drivers installed in the machine. The advantages also extend to installed computer programs.

The Hitachi CM800 display monitor is capable of various refresh rates depending on the chosen resolution settings. Normally, a display resolution of 1024 by 768 pixels with 60Hz refresh rate is used to minimize flicker while optimizing color display. It must be understood however that despite the presence of the correct device driver for the Hitachi CM800, resolutions are still dependent on the capability of the installed graphics card. In this situation, it is important that both the monitor and the graphics card are capable of supporting the same types of refresh rates as well as resolutions. The Hitachi CM800 monitor operates with a dot pitch of .22H/.16v and video clock frequency of 200MHz. The vertical frequency is up to 89KHz while the horizontal frequency reaches 160Hz. Display resolution is up to a maximum resolution of 1600 by 1200 pixels. It is highly recommended you run a free registry scan for and Hitachi CM800 errors before installing any driver updates.