HSP56 MicroModem

Windows device driver information for HSP56 MicroModem

HSP56 MicroModem driver is a firmware, which is upgradeable through the modem serial port. There are different driver versions for the Micro Modem. Users are however advised to choose the most recent driver when upgrading their systems. This is especially so because recent versions have improved project-specific features, which improves the performance of an application. The micro modem has a fixed processor (100 MHz) that transmits power at 50 watts only. However, this depends with the transducer used by the user during installation. The micro modem receives data at 120 millliwatts, much that goes to detecting and decoding FSK packets. The data transfer rate of the HSP56 Micro Modem is 80-54000 bits per second and supports five types of data transfer packets. Data rates, which need more than 80 bit per second in transmission, will require the user to install a co-processor card.

The HSP56 Micro Modem operates either terminal-timing modes or source-timing modes. The source-timing mode allows data resynchronization by eliminating inverted signals and loop delays. All units in the HSP56 Micro Modem are having specific link margin. As such, mobile users can use the micro modem while traveling on net-books and notebooks without having to look for wi-fi connection. The HSP56 Micro Modem can be used as a multiplexer since a maximum of six un-synchronized data streams can be handled in one micro modem. The micro modem has two high-speed signals on its data lines and four low-speed signals on its control lines. Advantages of using the HSP56 MicroModem include the modem's small size, which is small enough to connect to communication equipments and data terminals directly. In addition, the HSP56 Micro Modem offers transparency and versatile solutions to data communications. It is highly recommended you run a free registry scan for and HSP56 MicroModem errors before installing any driver updates.