I-Surf USB

Windows device driver information for I-Surf USB

This siemens I-surf USB provides the dedicated I/O bandwidth of PCIe with out bus sharing for Gigabit Ethernet connectivity in category 5 networks. This modem is designed to provide high performance in the multi processor systems by efficiently balancing network loads across multiple the computers central processor. It also features 10/100/1000 mbps self configuration for compatibility with mixed speed network devices. All the connections are supported by the siemens PRO intelligent install. This simplifies the adapter installation and gives the user the point and click power to configure and manage all siemens PRO network connections. It also features multi Giga bit scalability and increased up time through advanced server features. It comes with an optional low profile bracket included for high density as well as rack mounted servers. It comes fully compatible with most windows platform from year 2000.

It comes in dimensions of (H x W x D) 1.75 inches x 2.35 inches x 0.19 inches (44.60 mm x 59.75 mm x 4.9 mm) and weights 12 grams. Its operating temperature is between 0 to +70 degrees Celsius and a humidity of between 0 to 95% none condensing. It operates with a frequency band of 5.15 GHz to 5.35 GHz and had modulation of BPSK, QPSK, 16 QAM and 64 QAM. It can use up to 8 channels within a transmit output power of 14dbm. Its adapter power consumption is quite typical as it transmits with only 1.7 watts, receives with 1.3 watts, is on stand by with 135 m W and can be on sleep mode with 45mW. Its in door range is 40 ft (12m) @ 54 bps but with an out door range of 100 ft (30m) @ 54 mps. It is highly recommended you run a free registry scan for and I-Surf USB errors before installing any driver updates.