IEEE 802.11b WLAN PCI Card v3.0

Windows device driver information for IEEE 802.11b WLAN PCI Card v3.0

This is a network card that has an embedded 802.11b/g Mini PCI type 3B adapter operating in a 2.4 GHz spectrum. This is based on the Mini PCI Type 3B form designed to accommodate the space and size requirements for thin and light notebook PCs. The PCI is compliant with IEEE802.11. This is a high-efficiency wireless adapter for wireless network at home. The data rate can be up to 54 Mbps and auto-negotiated. It has an output power up to 20dBm with a complete security feature WEP 64/128, WPA2 802.1x. the PCI Cisco CCXV1.0 and V3.0 Compliance. The antenna diversity enables optimized WLAN performance for multi antenna system that comes with an advanced quality of service. The antenna interface connector mates with cable connector U.FL-LP-066 for better wireless signal reception it acts as a booster. The PCI has a second antenna, a dual diversity antenna that is onboard.

The PCI has an on and off radio controller supported by both software and hardware. There is an on board connector interface that is a mini PCI type 3 edge connector. The card operates at a temperature 0 to +80 degrees Celsius, for humidity non operating starts from 50 to 92% RH non-condensing. The PCI card has a dimension of 1.75 *2.35*0.19 and a weight of 12g, the card is light and smaller than most people expect. It comes with WHQL and it is Mini PCI compliant. It comes with its own driver pack and installation cd. It has an installation manual that gives step by step installation process. It is highly ranked especially when used for laptops. It has a great customer response and highly recommended. It has a stainless steel cover to protect the micro chips and with the installation of its drivers it performs at an impressive speed. It is highly recommended you run a free registry scan for and IEEE 802.11b WLAN PCI Card v3.0 errors before installing any driver updates.