Infotel 1428VQH-R

Windows device driver information for Infotel 1428VQH-R

This infotel 1428VQH-R modem wide area network (WAN) is a U.S.B 1.1 attached device designed for the best possible user setup. This high sped modem can train up at full Asymmetric digital subscriber Line(ADSL) speeds and is optimized for the best effective through put available on some USB modems. It delivers an excellence performance on DSLAMs and back end servers. Its auto configuration software applies customer specific information to create hands off zero reboot on the set up. It comes with high speed, single-table, high resolution and 2-axis system. Its modes can be easily configured with or without optical isolation and can be mixed on the card: RS-232, RS-485 and RS-422 or 20mA current loop. Its interrupts, addressing and transfer rates are only set through the BIOS. The power draw from the USB bus is 460mA. It also operates in either isochroous or bulk data mode and shares USB bandwidth.

This Infotel modem device is a compact system for decentralize measurement and regulation tasks. It comes with a 64-bit MIPS processor and a 256 MB SDRAM. It is also open sable with a MSX-box 500 and with a flexible I/O configuration through PCI boards with an APCI-1500: 32 digital I/O, 24 V and isolated. This device is Ethernet (TCP/IP) ready as well. The interface type is CAN and with a fast application development with ISaGRAF, IEC61499 and IEC61131 work bench. It comes with a DIN-rail mounting with a main unit of 220 V, 24 V and 12 V. it also comes with a controller board with a RISC processor and a fast 16 MB flash memory with a preinstalled real time operating system RTAI Linux. Its web server and FTP functions, IP address with a fan control with a temperature sensor on controller board. It is highly recommended you run a free registry scan for and Infotel 1428VQH-R errors before installing any driver updates.