Intel 21143/2 based 10/100 mbps Ethernet Controller

Windows device driver information for Intel 21143/2 based 10/100 mbps Ethernet Controller

This Intel 21143/2 based 10/100 mbps Ethernet controller comes with an on board i960 processor is a must overload web servers. It also ahs a full duplex and auto negation, it includes fault tolerance, load balancing, support for fast ether channel and Intel link aggregation. It also supports Cisco ISL virtual LANs and PCI hot plug technology for adapter replacement while the server is running. It comes with IEEE 802.11 a/b standard technology and has Cisco compatible extensions in some models newer models. It also has Bluetooth coexistence capability and also an onboard dual diversity switching support for systems designed with two antennas. The antenna inter face connector is hirose U.FL-R-SMT mates with cable connector U.FL-LP-066.its radios on/off features are supported by both hardware and software. The Intel adapter has a connector interface mini PCI type III edge connector.

It comes in dimensions of (H x W x D) 1.75 inches x 2.35 inches x 0.19 inches (44.60 mm x 59.75 mm x 4.9 mm) and weights 12 grams. Its operating temperature is between 0 to +70 degrees Celsius and a humidity of between 0 to 95% none condensing. It operates with a frequency band of 5.15 GHz to 5.35 GHz and had modulation of BPSK, QPSK, 16 QAM and 64 QAM. It can use up to 8 channels within a transmit output power of 14dbm. Its adapter power consumption is quite typical as it transmits with only 1.7 watts, receives with 1.3 watts, is on stand by with 135 m W and can be on sleep mode with 45mW. Its in door range is 40 ft (12m) @ 54 bps but with an out door range of 100 ft (30m) @ 54 mps. It is highly recommended you run a free registry scan for and Intel 21143/2 based 10/100 mbps Ethernet Controller errors before installing any driver updates.