Jenoptik JD-350 DSC Driver 0D960000

Windows device driver information for Jenoptik JD-350 DSC Driver 0D960000

The Jenoptik JD-350 DSC gives a high volume and diagnostic quality images for 11 x 14-in. it has all the qualities of a superior dry laser imager in an 11 x 14 in format. The laser never touches the film and never wears out and thus gives stead fast reliability. It gives up to 120 films per hour for maximum productivity. It also comes with micro laser spacing with 325 dpi resolution for sharp images. The added advantage of continuous grey images of up to 4,096 gray levels is also available in all standard formats like the 1:1, 2:1 and even the 20:1.its PACS link interface allows your facility to establish basic network printing and take an affordable first step toward PACs. It can also convert image data from legacy modalities to DICOM and receives DICOM image data over a network. It can also send image data over a network for soft copy viewing and archiving.

This Jenoptik JD-350 uses laser imaging technology. The true dry laser technology uses a 78-micron laser spot spacing and gives a life time film achievability of 100 years. It comes in a standard height of up to 52 inches, a width of 25 inches and a depth of 32 inches and a weight of 550 lb (250kg). The electrical requirements for it include a voltage of 200/220/240 Hz in a frequency of between 50/60 Hz. Its typical power consumption however is 700 VA. The keypads are 60 meters via copper connection of an optional footswitch. It operates at a temperature of 59 degrees to 95 degrees F, a humidity of 15% to 85% RH and a maximum magnetic filed of 50 g’s. It can take a heat load of up to 2300 BTU/ hour, floor load of 125 lb/ft, an acoustic noise of 55 db in normal situation and also an operation of 70 db transient. It is highly recommended you run a free registry scan for and Jenoptik JD-350 DSC Driver 0D960000 errors before installing any driver updates.