Logicode 14.4 Data-Fax 1414XV-R

Windows device driver information for Logicode 14.4 Data-Fax 1414XV-R

The Logicode 14.4 Data-Fax 1414XV-R like most communication hardware components provide functional infrastructures for the exchange of data. This infrastructure is normally supported by a device driver partly responsible for its reliability and security. It makes it possible to apply digital enhancements using analog telephone lines for the efficient connection to remote networks or computer systems. The whole process is simplified in such a way that the computer user does not have to be directly involved in the technical details of the transmission process. The Logicode 14.4 Data-Fax 1414XV-R basically incorporates the capability of sending and receiving faxes with the functionality of exchanging bits of data. The communication procedure for either type of transmission is basically the same and begins when the computer user initiates the connect command that the device driver sends to the attached hardware component. The modem will then attempt to connect the remote network by sending a handshake signal to the modem on the other end. Once acknowledged the two computer systems are now connected and the communication infrastructure is linked.

The presence of the communication link will allow for the simultaneous sending and receiving of data packets. The device driver from the sending computer system will divide the data to be sent into smaller pieces containing certain instructions as to its size and its place in the puzzle so to speak. Once the data packet is received at the other end the modem will inspect its contents and verify it based on the incorporated information. If some of the information do not match the modem via its device driver will attempt to initiate error correction routines. These routines may include checking its integrity or requesting the modem to resend the particular data packet among others. The device driver also helps in determining what type of data is being transmitted. Based on this type the two communicating modems will decide on the most efficient compression algorithm to use to make the transmission faster, secure, and error free as possible. It is highly recommended you run a free registry scan for and Logicode 14.4 Data-Fax 1414XV-R errors before installing any driver updates.