MegaRAID Elite 1600 RAID Controller

Windows device driver information for MegaRAID Elite 1600 RAID Controller

The MegaRAID Elite 1600 RAID Controller is an SCSI driver. It is compatible with an operating system of Windows NT, XP, 2000 and 98. It Requires additional requirements to run which include Windows 98SE, NT, 2000, XP and ME. This models identification number is SO 47101.001. It is characterized by two ultra160 SCSI channels which offer users unequaled reliability and performance on workgroups, ISPs and department server environments. It has an elite 1600 half size adapter which employs the latest 64-bit. It has an MHz PCI SCSI RAID technology that uses the Intel i960. Its technical details include a controller interface which is of the Ultra160 SCSI type. It transfers data at rates of 160 Mbps. Its buffer size is 128 Mb when installed and it remains the same when maximized. Its device type is of a storage controller {RAID} and it is a plug in card.

The MegaRAID Elite 1600 RAID Controller supports devices such as the disk array for RAID and hard drives. It is made up of two channels and it has a maximum storage device quantity of 30Mb. The RAID levels rage from 0, 1, 3, 5, 10, 30 and 50. Its system requirements include UnixWare 7.1, Novell Netware 4.2 and Red Hat Linux 7.X. Other additional requirements for its operation are Windows XP, 2000 and Open Unix 8.0 enterprise edition. It has a height of 10.7 cm and a depth of 17.5 cm. It has an interface type of PCI 64/66 MHz. It comes with a compatible slot which is the PCI 64/66 MHz and it is half length. Its expansion slot is a memory which is of DIMM 168 PIN. Its compliant standards are of ACPI and PC 99. This device's installed software includes drivers and utilities. It is highly recommended you run a free registry scan for and MegaRAID Elite 1600 RAID Controller errors before installing any driver updates.