MOXA USB to RS-232

Windows device driver information for MOXA USB to RS-232

MOXA USB to RS-232 allows one to instantly plug and play. It enables one to connect to the RS-232/422/485 devices to the workstation or laptop by using the USB port. It is suitable for such applications as mobile, instrumentation and point of sale. Serial port expansion is made easy since the device functions well even without IRQ, DMA or I/O address resources. Besides, it saves setup time and costs as one does not have to turn off the system when adding CDM ports. This converter is fitted with the USB 2.0 or Hi-Speed 480 Mbps, on chip hardware, a 128 byte FIFO, burst data mode as well as software control. These features increase the performance of the device making them one of the best in the market. What is more, the device is also easy to monitor since it has the LEDs and management software.

MOXA USB to RS-232 has a 12 Mbps data rate in addition to D B9 male connector and LEDs that indicate the activity of USB and TxD/RxD. All serial ports have a 15 KV ESD protection and it is compatible with new and legacy RS-232 devices. Its baudrate performance runs at about 50 bps to 921.6 kbps. It has one serial port and operates with a 1110: RS-232 Serial Standards UPort. The device consumes power at about 1110: 30 mA @ 5 VDC and works well at a temperature between 0 to 55 degrees Celsius. It is recommended that it should be stored at a temperature between -20 to 70 degrees Celsius. MOXA USB to RS-232 operates at a full speed estimated at 12 Mbps and comes with a manufacturer's warranty of five years. It is compatible with USB 1.0/1.1 and USB 2.0. It is highly recommended you run a free registry scan for and MOXA USB to RS-232 errors before installing any driver updates.