NEC WMC USB_BK1 Modem (WDM)

Windows device driver information for NEC WMC USB_BK1 Modem (WDM)

This NEC modem contains an inbuilt subscriber mailbox which carries with a maximum of 65,000 and also voice ports (IP only) with 2 to 32 with available upgrades. It can operate on a windows platform with both windows 2000 and XP plus also operate on a Linux operating system. This modem is hard drive dependent but can hours up to 3600 hours. It requires at least a working modem of 1 Giga bytes and also an optional external USB of 56 kbps. The network interface on board Ethernet is 10/100 base T, auto negation and RJ45. Its security key is USB. This modem has an ultra high compression throughput due to parallel access directly to the host PC. It can also be hard set by the user from are remote site and the modem resets are two external resets for peripherals.

This modem has dimensions of 5.25' x 5.10' x 1.50' (L x W x H) and weights 2.5 kilo grams with the standard battery in it. The battery should be weights 0.3 kg which allows it to operate for 8 hours and charges for up to 3 hours. With its wired connectivity technology, this modem can transfer speeds of 30 mbps. Its environmental operating temperatures include -13 degrees Fahrenheit to 140 degrees Fahrenheit with relative humidity. It also condenses at a rate of 0 to 95%. It has a modem shut off protection of 14.4 kbps. This modem has an integrated ring detector and an integrated analog front end and a loop current monitor. Its interfaces has an expansion slot which allows 1 x modem –F connector, 1 x Hi speed USB – 4 pin USB type B and 1 x network – Ethernet 10 base . It is highly recommended you run a free registry scan for and NEC WMC USB_BK1 Modem (WDM) errors before installing any driver updates.