PHASE88

Windows device driver information for PHASE88

PHASE88 is designed with PCI, USB together with Firewire formats such that it offers a MIDI interface as well as a professional audio that enables a PC or MAC to deliver performance similar to a professional recording system. The device consists of eight high quality input and output converters which are used to process audio signals. These converters have a resolution of about 24 bits and 96 kHz and are placed in a module that is about 5 1/4 inches. The module can either placed outside the computer or installed within the computer. This device also consists of optimized conversion components as well as perfectly designed circuits that enable it to bring out crystal clear recordings. The device can bring out recordings of about eight simultaneous tracks and has a maximum playback resolution of about 5.1 or surround sound of about 7.1.

PHASE88 has a converter dynamic range of about 24-bit and it also has an on-board hardware mixer that has 20 channels, an internal resolution of about 36-bit as well as a 20-in-4 routing. PHASE88's input ports have an analog stage that can be toggled from -10dBv up to +4dBv whereas its variable amplifier goes up to 18dB gains. It also has a channel thru monitoring which produces zero latency while the ASIO 2.0 driver induced latency goes to even less than 3 ms. The device creates a perfect solution for studio that operate without an external mixer as its features offer the performance of a full fledged recording system. It has S/PDIF digital input/output fitted on its PCI bus card and this enables the device offer the digital studio environment a perfect interface. It is possible to synchronize and cascade four PHASE 88 recording systems within one computer. It is highly recommended you run a free registry scan for and PHASE88 errors before installing any driver updates.