ViewSonic E70-11

Windows device driver information for ViewSonic E70-11

The ViewSonic E70-11 is a 17 inch monitor. The driver is compatible with PC and Mac systems. For the PC the VGA has a maximum resolution of up to 1280 by 1024 which are non-interlaced. The Mac system on the other hand that is Power Mac G3/G4 has a maximum resolution of up to 1024 by 768. It has a diagonal dot pitch of 0.27 millimeters and a horizontal dot pitch of 0.23 millimeters. The glass surface has been equipped with a tint of TM~50% and its screen coating is both anti glare and anti static. The horizontal and vertical synchronization are separated and composite as well. The video input horizontal frequency is 30~70 kHz while the vertical frequency is 50~160 Hz. The driver’s video is RGB analog of 75ohms. The ViewSonic E70-11 measures a height of 16.1 inches, a width of 15.8 inches and a depth of 16.7 inches.

The ViewSonic E70-11 requires a Voltage of AC 90 to 264 Volts for auto switch and has a power consumption of 75 Watts. It operates in an environment with a temperature of between 32 to 104 degrees and a relative humidity of 5 to 95 percent that is non-condensing. The power connection is 3-pin plug that is IEC320 while the connector signal is 15-pin mini D-sub. The monitor is 16 inch viewable and has a 90 degree deflection. It has control buttons for both contrast and brightness. Other controls consist of pin balance, moiré reduction, language view meter, tilt, memory call as well as zoom controls for the images. It weighs a total of 15 kilograms on normal basis. The ViewSonic E70-11 comes with a three year warranty that is on-site and includes both labor as well as the parts. It is highly recommended you run a free registry scan for and ViewSonic E70-11 errors before installing any driver updates.