Viking Combo 10Mb/s Ethernet

Windows device driver information for Viking Combo 10Mb/s Ethernet

The Viking Combo 10Mb/s Ethernet Card combines a high quality, internal data and fax 33.6 Kbps V.34 modem and a 10 BaseT Ethernet card with users’ home networking system into a single card solution that makes use of only one expansion slot. It is capable of providing users with simultaneous modem and network operations, and power saving modes that can lessen power consumption in the event that the modem or network features are not being used. It is compatible with the industry Ethernet standards 10 BaseT Ethernet 802.3, cable in the category 5 with a RJ-45 connector and data transfer through memory mapped or programmed I/O. It also implements the industry Fax- Modem standard fax rates of up to V.21 channel 2, V27ter, V.29, ITU-TV.17 and 14,400 bps, and the fax modes Class 2 ATfax and Class 1 commands for faxing operations. To take advantage of the complete fax mode, users must utilize a software package for fax communications.

On the other hand, the Viking Combo 10Mb/s Ethernet Card also makes use of various Data- Modem industry mode and ITU-T Standards. These include DTE speeds of up to a maximum of 230,400 bytes per second, the COMport interface 16550, hayes AT command set, the MNP5 and V.42bis data compression, and the V.42bis MNP10, MNP2 to 4 and V.42bis LAPM error correction protocol. This combo card is likewise fully compliant with the ITU-TV.34, ITU-TV.34 Annex 12 (33,600), Bell 103 and 212A, V.21, V.22, V.32 and V.32bis protocols. A fax + data modem such as the Viking Combo 10Mb/s Ethernet Card allows a computer system to send and accept document as fax documents. It is comparable to a data modem in that it is developed to send documents via another fax modem or fax machine. It is highly recommended you run a free registry scan for and Viking Combo 10Mb/s Ethernet errors before installing any driver updates.