WinTV HVR-950q ATSC/QAM Capture Device


Device driver details
Category: USB
Manufacturer: Hauppauge
Caution Level: Intermediate
Download File Size: 23 MB
Operating System: Windows XP
Latest Version / Release Date: 1.84.26100.1 / 20th May 2008
Download DriverScanner to check your PC for outdated drivers
Before you download: We recommend you scan Windows for registry errors

Windows device driver information for WinTV HVR-950q ATSC/QAM Capture Device

WinTV HVR-950q ATSC/QAM Capture Device offers an over the air digital TV of ATSC high definition as well as a cable analog TV to the users laptop or TV. It enables TV to be recorded and watched on full screen or in a Window. The WinTV-Scheduler is used for recording the favorite digital or analog TV shows through the use of high-quality MPEG. The TV recordings can be played back to the screen at any particular time. The clear QAM channels of the digital TV are channels of digital cable and can hence be watched on TV sets without necessarily requiring a top box set of the cable TV. Most cable operators are capable of transmitting local high ATSC definition channels through the use of clear QAM. Certain cable operators may transmit additional TV programs, which are non-premium through the use of clear QAM. Channels of clear QAM range from the utmost 1080i definition to the standard definition.

The drivers for WinTV HVR-950q ATSC/QAM Capture are installed by first downloading the file from the manufacturers site and saving it on the computer before proceeding to unzip. The USB device is then connected to the computer followed by right clicking on My Computer and a click on Properties. The next step is proceeding to the Hardware tab where a click on the button for Device Manager finds the new USB device on an image category. The new USB device should be double clicked and the button for Reinstall Driver pressed. Install should be selected from the specific location and check Include Location before clicking the Browse button for the Hauppauge driver to be selected. The Next button is clicked to proceed and the Finish button to end the installation. The new USB device should be seen inside the Device Manager. It is highly recommended you run a free registry scan for and WinTV HVR-950q ATSC/QAM Capture Device errors before installing any driver updates.


You are currently viewing the device driver detail page for WinTV HVR-950q ATSC/QAM Capture Device

Browse more device drivers