WS-1414CM1 Data Fax

Windows device driver information for WS-1414CM1 Data Fax

The WS-1414CM1 Data Fax modem device makes use of the traditional technology of phone lines along with more advanced digital improvements. The sending data fax modem device will be the one to dial the phone number and send the white noise audio signal through the Internet or phone line to the receiving data fax modem device. It then waits for the other data fax modem to verify if the data has been received. Afterwards, the 2 data fax modem devices goes through a process called ‘handshake’. In the handshake process, each modem will tell each other the kind of data fax they are, either digital or analog and then verify that the phone line is clear and is able to make an accurate transmission. Common kinds of faxes include the Super group 3 and Group 3 digital data fax modem devices.

Afterwards, the 2 modems at work settle on what kind of data compression to utilize and the speed for sending the data. The compression methods will be dependent on every classification of data fax modem devices. The Modified Read data compression method is capable of comparing the 1st line to the 2nd line and modifying the signal based on the line changes, while the Modified Huffman data compression method compresses the data’s white space in the signal line. The Super Group 3 fax is capable of sending at a minimum rate of 14.4 kilobytes per second but it is also capable of sending at 33.6 kilobytes per second. The attached data or scanned image when sent via FOIP or Fax Over IP (internet protocol) is then compressed digitally and sent as a sequence of analog signals that will be compressed digitally by the receiving modem device. It is highly recommended you run a free registry scan for and WS-1414CM1 Data Fax errors before installing any driver updates.