ZTE Diagnostics Interface (COM13)

Windows device driver information for ZTE Diagnostics Interface (COM13)

ZTE Diagnostics Interface (COM13) is a HSDPA USB modem capable of high speed mobile broadband of almost 3Mbps where available. Where required, this USB modem device degrades to a lower mobile network speed. The Chinese telecommunications company known as ZTE provides this modem, which has the capabilities of self-installing on Windows, but for Mac OS, there is a provision for a disc. When this modem is plugged in, it is detected by Windows as a device for mass storage. After loading the drivers, it somehow detects that this is some data interface variety and all this is displayed in the Device Manager. The plug and play of Windows searches for drivers required by this interface, locates them on the modem and proceeds to install them from this point. The data interfaces that require to be installed are three and this ius accomplished in the add hardware wizards.

The drivers for ZTE Diagnostics Interface (COM13) are installed by first downloading the file from the manufacturers site and saving it on the computer before proceeding to unzip. The modem device is then connected to the computer followed by right clicking on My Computer and a click on Properties. The next step is proceeding to the Hardware tab where a click on the button for Device Manager finds the new modem device on its category. The new modem device should be double clicked and the button for Reinstall Driver pressed. Install should be selected from the specific location and check Include Location before clicking the Browse button for the Lexmark driver to be selected. The Next button is clicked to proceed and the Finish button to end the installation. The new modem device should be seen inside the Device Manager. It is highly recommended you run a free registry scan for and ZTE Diagnostics Interface (COM13) errors before installing any driver updates.