Category: Input Device
Manufacturer: ACARD Technology
Caution Level: Safe
Download File Size: 539.4¬†KB
Operating System: Windows 2003, Windows NT 4, Windows NT, Windows XP, Windows 2000, Windows 98
Latest Version / Release Date: 22.214.171.124 / 23 Feb 2006
The ACARD AEC-6712UW PCI Ultra/W SCSI Adapter is a highly performing PCI bus master Ultra SCSI-3 adapter that can transfer rates of the SCSI bus to roughly 40MB/Sec. The ACARD AEC-6712UW PCI Ultra/W SCSI Adapter give backup to the full features of PCI 32-bit bus master together with the enhanced PCI transfer commands. This device also gives backup to the Scatter/Gather functions in a way that it improves multi-tasking O.S. Performances. Features of the ACARD AEC-6712UW PCI Ultra/W SCSI Adapter include: - superior and powerful setup functions, low overhead command, Flash BIOS interfaces and incorporated ATP870UW 32bit RISC engine. Others are automatic sense in NEC PC-98 and IBM PC AT, Scatter/Gather operation backup and asynchronous rates of transfer to roughly 7MB/Sec. Removable device boot enable setup, automatic FIFO threshold selection, burst master cycle that is approximately 133MB/Sec at 33MHz as well as PCI Plug and Play and grouping commands that minimize interruptions and handling responsibilities are also its features.
Unless you update your drivers regularly you may face hardware performance issues.
To check your drivers you should manually verify every device on your system for driver updates
For a successful installation process of the ACARD AEC6712UW PCI Ultra/W SCSI Controller driver, there are provisions that all people must follow. First, download the ACARD AEC6712UW PCI Ultra/W SCSI Controller files from the manufacturer's website, save them on the computer and then unzip. Connect the ACARD AEC6712UW PCI Ultra/W SCSI Controllers to the computer. Right click under ‚ÄòMy Computer' and then click on ‚ÄòProperties'. After that, go to the Hardware tab and click the Device Manager Button. Users will then find their new ACARD AEC6712UW PCI Ultra/W SCSI Controllers on categories known as ‚Äòscsiadapter'. Double click the device option and press ‚ÄòReinstall Driver'. Pick on ‚ÄòInstall from specific location', confirm by clicking on ‚ÄòCheck Include this location' and then click on ‚ÄòBrowse' to choose the ACARDdriver. To continue with the installation, click ‚ÄòNext' and to conclude, click at the finish button. To view the newly updated versions of the adapter, users can view under the device manager utility It is highly recommended you run a free registry scan for and ACARD AEC-6712UW PCI Ultra/W SCSI Adapter errors before installing any driver updates.