Adaptec SATA RAID 2810SA Controller

Category: System and Controller
Manufacturer: Adaptec
Caution Level: Intermediate
Download File Size: 1000.00 B
Operating System: Windows 2003, Windows NT, Windows XP, Windows 2000, Windows 98
Latest Version / Release Date: / 18 Feb 2008

Windows device driver information for Adaptec SATA RAID 2810SA Controller

Adaptec SATA RAID 2810SA Controller's package also include Adaptec storage Manager, BIOS configuration utility, Command Line Interface (CLI) and an eight 1-meter serial ATA cables. Its physical dimensions are 9.25 inches by 5 inches while the operating temperature is between 0 and 55 degrees C. Its power requirements are 1.6 ams at +5V while its system requirements include available PCI slot that meets PCI 2.2 specification. Its data transfer rate is at a maximum of eight serial ATA ports while the bus system interface type is 64-bit/66 MHz PCI. Some of the key RAID features that it has include: optimized disk utilization, online RAID level migration, online capacity expansion, background initialization, SNMP support and enclosure management ready. Its cache memory is 64 Mbyte with its capacity being a maximum physical disk drive size of 1TB and a maximum array size of 2TB.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

Some of the key specifications of Adaptec SATA RAID 2810SA Controller include; optimized disk utilization, RAID level migration, online capacity expansion, background initialization, enclosure management ready and support arrays that are bootable. It has a hot swap disk drive support for easy replacement as well as hot-spare disk support with automatic rebuild. It is beneficial because it has a high capacity 8 –port RAID card brings advanced Serial ATA features and data protection to midrange and high-end servers using low cost SATA drives. The supported operating systems include Microsoft Windows, Novell NetWare, Red Hat Linux SuSE Linux, SCO UnixWare, SCO OpenServer, FreeBSD and VMware ESX Server. Users of Adaptec SATA RAID 2810SA Controller are advised to always use the latest version the devise driver as this will assist them to utilize its functions better and easier. It is highly recommended you run a free registry scan for and Adaptec SATA RAID 2810SA Controller errors before installing any driver updates.