AT&T; KeepInTouch Card

Category: Network and Modem
Manufacturer: AT&T;
Caution Level: Intermediate
Download File Size: 167KB
Operating System: Windows 95, 98, 98SE, ME
Latest Version / Release Date: 4.10.1343 / N/A

Windows device driver information for AT&T; KeepInTouch Card

AT&T; KeepInTouch Card is designed to offer the best internet connection solutions. The secure and reliable device uses antiquated technology of telephone lines and at the same time it uses the technology of modern digital enhancements. It operates on a simple system that enables the instantaneous transmission of information. This device allows one to access the internet using AT&T;'s EDGE as well as 3G network. It gives one the flexibility of roaming when connected to the internet. Its 3G broadband technology allows one to connect to the internet at super fast speeds. This card allows one to surf the net, read and send email, download files and keep in touch regardless of the location one is in. The device supports both Windows and MAC operating systems and its data plans enables to access AT&T;'s super fast Wi-Fi service at Starbucks.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

AT&T; KeepInTouch Card combines the technology of both data and fax modems. Its maximum data rate is about 14.4Kbps while its maximum fax rate is about 14.4Kbps. The device uses PCMCIA type 2 data Bus and its fax class is class 1 and 2. It uses Bell 103A/212A, ITU-T V.21, V.22, V.22bis, V.32, V.32bis as well as AT&T; ETC cellular protocol as its data modulation protocol while the fax modulation protocol is ITU-T V.17, V.27ter, V.29. The device also has an auto reliable time configuration setting which enables one to control the handling of incoming data throughout the auto-reliable time period. The auto-retrain V.32bis feature enables one to select the auto-retrain mode for the V.32bis. AT&T; KeepInTouch Card also has a break type setting which allows one to configure action for the break signal. The device comes with a 30 day warranty upon purchase. It is highly recommended you run a free registry scan for and AT&T; KeepInTouch Card errors before installing any driver updates.