AT&T; KeepInTouch Cellular 28.8 V.34 PCMCIA

Category: Network and modem
Manufacturer: AT&T;
Caution Level: Safe
Download File Size: N.A.
Operating System: Windows 98/2000/XP/2003/NT
Latest Version / Release Date: 5.1.2535.0 / 03 Aug 2000

Windows device driver information for AT&T; KeepInTouch Cellular 28.8 V.34 PCMCIA

AT&T; KeepInTouch Card is innovated to give the most advanced Internet connection solutions. AT&T; is fully equipped and the device has a guaranteed security with the use of telephone lines and at the same time it uses the technology of modern digital enhancements. Basically, the device simply transmits data through immediate transmission of information. This transmission is mostly accomplished by connecting to the Internet using AT&T;’s EDGE and 3G networks. This feature gives the customer the power of flexibility, particularly in roaming while using the Internet. Another new connection is the 3G broadband technology which is faster than the usual or standard connections. This PCMCIA card enables the user to browse the net, read and send email, download files as well as keep in touch regardless of the distance and or location. Lastly, compatibility is not a problem with this device since it can support either Windows or MAC operating systems. Adapting and adjustments is not a definition of this device since this has been designed to enable two of the widely used operating systems in the market nowadays. In the advent of the Internet and Ethernet, network cards such as these have come forward. The Ethernet makes all network communications possible and this has been existent since the mid-1990s. These Ethernet network cards contain an exclusive forty-eight bit serial number known as a MAC address.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

Principally, this is saved in ROM and carried on the card. Unique MAC addresses are very important as it is a requirement for every computer that operates on an Ethernet network. Addresses are bought separately to the Institute of Electrical and Electronics Engineers. They are also the one in charge of assigning addresses to each card at the time of production. Moreover, network cards are also expansion cards that are attached into a computer bus. Ethernet standard configurations provide inexpensive costs. This has become the standard amongst most new computers that have a network interface built into the motherboard. Such motherboards have any of the two main functionalities - Ethernet capabilities built-in the motherboard chipset or solely Ethernet chip linked through the PCI bus. Multiple interfaces only require an additional and a separate network card. The card applies the electronic circuitry which is needed for communication. Network protocol stacks come after a circuitry is identified which in turn allows communication amongst small groups of computers on the same LAN or a huge network communications through routable protocols. One good example is the IP. It is highly recommended you run a free registry scan for and AT&T; KeepInTouch Cellular 28.8 V.34 PCMCIA errors before installing any driver updates.