Creatix LC 144 VFI

Category: Network & Modems
Manufacturer: Creatix
Caution Level: Intermediate
Download File Size: 82.6 Kb
Operating System: Windows 98
Latest Version / Release Date: 9 / 04 Dec 2003

Windows device driver information for Creatix LC 144 VFI

The driver for Creatix LC 144 VFI also acts as a driver for various other models. It is applicable to the following modem models: Creatix 33.6 PCMCIA Data Fax Voice Internationa, Creatix 56000 Series98, Creatix 56k CLV, Creatix Big Joe, Creatix Joe 33.6, Creatix K56flex Series98, Creatix LC 144, Creatix LC 144 I , Creatix LC 144 VF, Creatix LC 144 VFI, Creatix LC 288 FC, Creatix LC 288 VFi, Creatix Little Joe, Creatix Netshuttle 33.6 VFi, Creatix PC 144 SF, Creatix Phonemaster 144 VF, Creatix Phonemaster 144 VFi, Creatix SG 144, Creatix SG 144 I, Creatix SG 144 , creatix sg 2834, cREATIX sg2834 CLV, Creatix SG2834 TURBO, Creative SR 2496, Creatix SR 2496, Creatix Creative V90, Digitec BTX-COM (nur BTX, datex-J moeglich, Digitec LC2496, LC 2496, Wave Access Jaguar PCMCIA Wireless LAN and Creatix Voice Modem Serial Wave Device. It is manufactured by Creatix Polymedia GmbH.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

The Creatix Polymedia LC144 VFI is a modem card type. It has 3 I/O options: Analog phone port (RJ-11), microphone in and speaker jack. It has a maximum data rate of 56kbps and has 2 fax classes; classI and classII. The data modulation protocol of the device is Bell 103/A or 212A and ITU-T V.21, V.22, V.22bis, V.23, V.32 and V.32 bis. The fax modulation protocols of the device are the following: ITU-T V.17, V.17, V.21 CH2, V.27 ter and v.29. The error correction or compression of the device are as follows: MNP5, V.42 and V.42 bis. The data bus of the Creatix Polymedia LC144 VFI is 8-bit ISA.The phone port RJ-11's label of the device is CN1, and it functions as a speaker, while the microphone jack's label is CN2. It has 4 interrupt selections. The first is the IRQ 3, in which the JP1/C is closed, and the rest are open. The second is the IRQ4, in which only the JP1/D is closed and the rest is open. The IRQ5 has all interrupts open except for the JP1/F and the IRQ7 has the JP1/F closed and the rest open. It is highly recommended you run a free registry scan for and Creatix LC 144 VFI errors before installing any driver updates.