Creatix V90

Category: Network and Modem
Manufacturer: Creatix
Caution Level: Safe
Download File Size: 5.4 KB
Operating System: Windows 98, Windows ME, Windows NT4
Latest Version / Release Date: 90 / 27 Jan 2010

Windows device driver information for Creatix V90

Creatix V90 is a data modem that can provide professional data transfer for any purpose. This device has the ability to support data transfer speeds of up to 54 Kbps using an Internet Service Provider’s Internet services. The device allows a maximum transmission speed of 33.6 kb/s. The device also supports a speed of 14.4 kbps when used in faxing documents. The device uses the 56k technology. The V.90 modem allows users to receive data at speeds that can reach up to 57.333 kbps over PSTN. However, PSTn is only limited to speeds to speeds of up to 54kbps in V.90 mode. The device supports asynchronous transmission of data modem and computer. It also features V.42bis data compression and V.42/MNP2-4 error correction. A rate of up to 115.200 bps of effective data transfer is also supported usingV.34 and V.42bis.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

Like other modems from Creatix, this modem can store 4 telephone numbers. It can also adapt to baud rates of up to 115.200 bps automatically. The modem features the AT-command set, it has voice capabilities, and an internal speaker. The modem has the capability to respond to AT commands. The format of these modem messages can be controlled using the V command verbal or numeric. Connection messages are also issued by the modem when it recognizes any activity coming from the telephone line. . The X command on the modem determines authorized messages. The W3-command is used for messages regarding error correction, data compression, modulation and data rate. The Creatix V90 driver comes as a software package that is 5.4 KB in size. This package supports Microsoft’s Windows 98, Windows ME, and Windows NT4 operating systems. The latest version of this driver is version 90. It is highly recommended you run a free registry scan for and Creatix V90 errors before installing any driver updates.