DAYTEK DT-75P

Category: Monitor and Video Card
Manufacturer: Daytek
Caution Level: Safe
Download File Size: 70.1 KB
Operating System: Windows 95, Windows 98, Windows 98SE, Windows ME, Windows 2000, Windows XP
Latest Version / Release Date: N/A / 09 Aug 2005

Windows device driver information for DAYTEK DT-75P

The Daytek DT-75P 17 inch flat CRT monitor has a dot pitch of 0.25 mm, dynamic focus, an anti-static/ non-glare/ anti reflection invar mask and the RGB (red/green/blue) analog input. This monitor device’s video features include a bandwidth of 205 MHz, 50 to 160 Hz V. frequency and 30 to 95 KHz H. frequency. The maximum resolution provided by this 17 inch flat CRT monitor is around 1600 X 1200 at 75 Hz while the minimum resolution is 1024 X 768 at 85 Hz. Although this monitor measures 17 inches wide, the actual viewable size is only around 16.1 inches. The Daytek DT-75P 17 inch flat CRT monitor also employs digital controls to aid users in easily adjusting the monitor’s settings. These digital controls include contrast, brightness, H and V moiré, size and position, bottom or top recall, mode recall, image tilt and trapezoidal. Other controls are image tilt, OSD (onscreen display), RGB and color temperature levels, manual Degauss, language and parallelogram.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

The driver supported by the Daytek DT-75P 17 inch flat CRT monitor is capable of allowing all programs using it to accurately recognize its presence once it is plugged into the system. This 17 inch flat CRT monitor’s configuration settings can be properly adjusted by the programs and operating system that needs its feature sets once the driver is properly installed in the machine. The Daytek DT-75P 17 inch flat CRT monitor can be set to use its maximum display resolution but this will however depend on the functionalities of the graphics card that the system utilizes. This 17 inch flat CRT monitor’s driver acts as a translator between the Daytek DT-75P monitor and the programs and/or operating system that requires its features sets because it is able to distribute and accept commands from both parties. It is highly recommended you run a free registry scan for and DAYTEK DT-75P errors before installing any driver updates.