Category: Monitor and Video Card
Manufacturer: Dell Computer Corporation
Caution Level: Safe
Download File Size: 6.4 KB
Operating System: Windows 95, Windows 98, Windows 98SE, Windows ME, Windows NT4, Windows 2000, Windows XP, Windows 2003
Latest Version / Release Date: / 17 Sep 2003

Windows device driver information for DELL E152FP

The DELL E152FP is a flat panel computer display monitor that makes use of an active matrix Thin film Transistor module. This type of module is commonly found in Liquid Crystal Display based computer monitors and similar display devices. The diagonal length of the display screen is measured at 15 inches while the horizontal length is equivalent to 110.9 inches. The entire height of the computer display monitor is measured at 8.9 inches. This makes the DELL E152FP a good computer display monitor for home and small office computing environments. The pixel pitch provided by the manufacturer is set at 0.297 by 0.297 mm with a viewing angle of 100 degrees and 120 degrees for vertical and horizontal measurements respectively. The device driver supports a luminance output equivalent to 250 cd/m2 and a corresponding contrast ratio of 300:1 for typical configurations. The surface of the computer display monitor itself is coated with an anti-glare filament.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

The backlight of the DELL E152FP is composed of either a 2 or 4 CCFL type and an associated response time measured at 25 ms. The optimal resolution that can be supported by the device driver is set at 1024 by 768 pixels using a 60 Hz refresh rate. The highest resolution that can be attained and supported by the device driver is pegged at 1024 by 768 using a 75 Hz refresh rate. The device driver also allows for the implementation of a horizontal scan in the range of 30 to 60 kHz. For the vertical scan range values are placed at 50 to 76 Hz and is adjusted automatically for both scan ranges. The device driver supports DOS, VGA, and VESA display modes. The manufacturer has incorporated preset display modes which are made available with the installation of the proper device driver. The computer user has the flexibility of selecting from any of the seven preset modes depending on his preference. It is highly recommended you run a free registry scan for and DELL E152FP errors before installing any driver updates.