EDIROL UA-101 USB1

Category: Sound & Multimedia
Manufacturer: EDIROL
Caution Level: Safe
Download File Size: 6.2Mb
Operating System: Windows XP
Latest Version / Release Date: 1.0.1 / 01 Jan 2001

Windows device driver information for EDIROL UA-101 USB1

The EDIROL UA 101 USB1 is an audio interface device. It was manufactured by Edirol. It is the first audio interface with a USB 2 port. The format of the device is half rack. It rails foer £399. It is equipped with mic preamps, all professional grade. The gain of the device is 40dB. Rotary sensitivity knobs operate the gain. It can be plugged to an electric guitar through the inner TRS jack socket. It has six inputs, all line level. They can be either balanced or unbalanced. The sensitivity of the device can be alternated from 010dbV to +4dBu. This makes the device very flexible. It has ten TRS wired output sockets. It is also equipped with MIDi sockets, both input and output.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

The EDIROL UA 101 USB 1 is a USB Audio Interface. It is for mixing digital audio. It has a dedicated monitor output and a balanced I/O/ The signal router and mixer application is included in the package. The device is also equipped with a built-in limiter and a 40 bit Internal processor. It can record 10 channels, playback 10 channels and function in full duplex at 98khz. In 192khz, it can record and playback 6 channels in full duplex function. The PC interface of the device is 24 bits and the AD/DA conversion is 24 bits (linear). The maximum digital output of the device is 96khz. It has 8 output jacks. They are all +4 dbu balanced. The typical S/N Ratio of the device for output is 107 db, while the input is 101 db. It uses 3 interfaces: USB (Hi speed and full speed), Digital input and output (optical IEC60958 S/PDIF) and a MIDI IN/OUT. It is highly recommended you run a free registry scan for and EDIROL UA-101 USB1 errors before installing any driver updates.