Fujitsu Siemens B17-2 CI

Category: Monitor & Video Cards
Manufacturer: Fujitsu Siemens
Caution Level: Safe
Operating System: Windows 2003 Windows 95 Windows NT Windows XP Windows 2000 Windows 98

Windows device driver information for Fujitsu Siemens B17-2 CI

The SCENICVIEW B17-2 CI is a business class 17 inch diagonal TFT LCD display monitor. It has a 338x270 mm picture size and graphics display of either 1280 x 1024, 1024 x 768, 800 x 600 and 640 x 480 dependent on the user's graphics processor. Its user-friendly menu consists of the following options; mute, direct key access, auto adjust, and input select. It has a response time of 8ms and OSD menu lock that is useful for adjusting the user's preferred settings. The special features of this LCD monitor include DisplayView software tools (Click, Scale, Surf), VESA FPMPMI (100mm), and standardized mounting. It is also Kensington Lock prepared. The SCENICVIEW B17-2 CI also has an advanced OSD language setup and advanced factory recall settings used for switching to its original settings before it was programmed by the user.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

The SCENICVIEW B17-2 CI is sleek and ergonomically designed. The settings for black and auto level, brightness and contrast, color 9300 K, native and color 6500 K can also be configured from its menu. This LCD monitor also has an information display mode and resolution notifier. Its Tilt base can be adjusted to a tilt angle of -5 deg to +25 deg, while its height range is approximately 75 mm. Its audio characteristics include digital volume control and a sound output of 2.0 W for the left and right speakers. It uses a 3.5 mm stereo phone jack for the input of audio signals. It is highly recommended you run a free registry scan for and Fujitsu Siemens B17-2 CI errors before installing any driver updates.