Category: System & Controllers
Caution Level: Safe
Download File Size: 24.7MB
Operating System: Windows 98, Windows NT, Windows 2000
Latest Version / Release Date: 5.621.0304.2005 / 15 Aug 2003
Realtek RTL8139/810x Family Fast Ethernet NIC controller is high integrated as well as cost-effective single-chip controller. It has 48-pin LQFP single chip, which supports USB up to 10/100Mbps Fast Ethernet operation. For it to connect to 1.0 Home PNA PHY, it offers MII interface that supports MII transmit clock that ranges from 0.2 MHz to 25 MHz. Realtek RTL8139/810x Family Fast Ethernet NIC controller can be used for updating existing drivers or else during new installation of network cards. However, it advises that if there are Windows that prompts user with 'New Hardware Found' for PCI Ethernet Controller, user should not spell out drivers location. Instead, user should finish new hardware wizard hence run program setup that is included in the package. Computer should be restarted to wide up with the installation.
Unless you update your drivers regularly you may face hardware performance issues.
To check your drivers you should manually verify every device on your system for driver updates
Realtek RTL8139/810x Family Fast Ethernet NIC provides USB to the Fast Ethernet capability and has full compliant standard support with IEEE 802.3x Duplex Flow Control and IEEE 802.3u 100Base-T specifications. Realtek RTL8139/810x Family Fast Ethernet NIC supports the power management for current operating systems capable of Operating System for Directed Power Management to succeed most capable power management. Realtek RTL8139/810x Family Fast Ethernet NIC controller requires 25MHz crystal as internal clock source and needs no external memory or logic. The Realtek RTL8139/810x Family Fast Ethernet NIC keeps eliminates usage barriers and keeps maintenance for network at a very cost low. This is the simplest way to connect a computer to the network without reconfiguring software, opening its cover, adding cards, or any other technicalities. It requires 5V of power for it to be able to operate. It has 18KB of SRAM that are inbuilt and uses 93c46 to store ID parameters and resource configuration among others. It is highly recommended you run a free registry scan for and Realtek RTL8139/810x Family Fast Ethernet NIC errors before installing any driver updates.