Seiko SLP-100 USB Driver

Category: Printer
Manufacturer: Seiko
Caution Level: Intermediate
Download File Size: 215 Kb
Operating System: Windows NT4, Windows 2000, Windows XP
Latest Version / Release Date: Not stated / Jun 8 2003, updated Nov 26 2004

Windows device driver information for Seiko SLP-100 USB Driver

Seiko SLP-100 USB is a modern printer with an enabled USB 2.0 compatibility. It runs on the versions of the Windows operating system highlighted above and periodically verifies the status of the computer's SLPMONX service, thus restarting whenever it deems necessary under special conditions. During such times, users may experience a situation whereby they may be unable to print but once the error is corrected and the SLPMONX service reboots the printer, it resumes operation as usual. Seiko SLP-100 USB uses drivers that are easy to download and install and which are also obtained as freeware. The most recently updated drivers should be used since older versions may cause conflicts with existing hardware devices and result in malfunction of the Seiko SLP-100 USB printer. Additionally, the installed drivers must be updated on a regular basis to make them fully functional.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

The Seiko SLP-100 USB Driver supports the printer by eliminating the problem of printing designed labels using a network printer or desktop. This is because the printer uses a thermal printing mechanism that does not need ink cartridges, ribbons or toners. Additionally, the printer is designed to be connected to a commuter via a USB port or a series of serial connections. With its enhanced driver, the Seiko SLP-100 USB printer is able to automatically capture address information required when printing mailing labels. The printer can also be easily connected to a computer network to facilitate shared LAN printing. The contents included in the Seiko SLP-100 USB package are the serial printer, a CD ROM containing label software, a USB cable, an AC adapter, a user guide, labels, and a QuickStart card. The printer and its driver require 10 MB of hard disk memory in to operate efficiently. It is highly recommended you run a free registry scan for and Seiko SLP-100 USB Driver errors before installing any driver updates.